Back to Blog
How-to Guides 2026-11-18 Adjustable Pillows & Quality Sleep Products | Coop Sleep Goods 0 views

Adjustable Body Pillow Firmness: How to Tune Fill for Sleep Support

Adjustable Body Pillow Firmness: How to Tune Fill for Sleep Support

Learn how to adjust the fill in an adjustable body pillow to find the right firmness for side sleeping, pregnancy support, and full-body comfort.

Why firmness matters more than size

A body pillow only helps if it supports you without pushing you out of alignment. Too much fill and it feels like a log; too little and it collapses under your knee or belly. The good news is that an adjustable body pillow lets you change firmness without buying a new pillow.

This guide walks through how to adjust body pillow fill using the Coop Original Adjustable Body Pillow as the example. It covers what to change, how to test, and how to fine-tune for side sleeping and pregnancy support.

How to adjust the fill step by step

The Coop Original Adjustable Body Pillow uses an interlocking dual-case system, which means you can open the outer case, reach the inner liner, and remove or add fill without dismantling the whole pillow.

  1. Start with the pillow as it arrives: Lie down in your normal sleep position and notice where the pillow feels too high, too low, or too hard. The fill is a medium-firm blend of memory foam and microfiber, so it will have some initial loft.
  2. Open the outer case: Unzip the Lulltra cover and fold it back to expose the inner liner. The dual-case design keeps the fill contained while you work.
  3. Remove fill in small handfuls: Take out fill from the center or the end that feels too firm. Keep the removed fill in a bag so you can add it back if you overshoot.
  4. Test before closing: Lie down with the case still open and the fill loosely distributed. Adjust again if you feel pressure at your hip, shoulder, or knee.
  5. Close and redistribute: Zip the cover and shake or knead the pillow to even out the fill. Re-test in your sleep position.

Checkpoints for side sleepers

For side sleeping, the pillow should fill the gap between your knees and support your top arm without lifting your shoulder. If your top hip rolls forward, the pillow is too soft. If your lower back arches or your top knee hovers, it is too firm.

A good checkpoint: lie on your side and relax completely. Your spine should feel long and neutral, not twisted. If you feel pressure on the inner knee, remove a little fill from that section. If the pillow slides out from between your legs, add a small amount back.

Pregnancy body pillow firmness

During pregnancy, many sleepers use a body pillow to support the belly and back as well as the knees. Firmness needs can change as the pregnancy progresses, so treat the fill as adjustable throughout.

Start with slightly less fill under the belly so the pillow contours rather than pushes. For back support, a firmer section behind the lower back can help you feel stable. Because the Coop pillow has a generous 20” x 54” size, you can position different sections for belly, back, and knees at the same time. Adjust one section at a time and re-test before changing another.

What the Coop Original Adjustable Body Pillow provides

  • Original Adjustable Body Pillow: Proprietary blend of medium firm memory-foam-and-microfiber fill This blend gives you a starting point that is neither rock-hard nor mushy, so small fill changes make a noticeable difference.
    Original Adjustable Body Pillow
    Original Adjustable Body Pillow
  • Original Adjustable Body Pillow: Interlocking dual-case system for easy adjustment You can open the outer case and access the fill without removing the entire pillowcase, which makes fine-tuning simpler.
  • Original Adjustable Body Pillow: Generous 20” x 54” size The length supports knees, hips, and shoulders at once, so you can adjust firmness in different zones.
  • Original Adjustable Body Pillow: Machine washable Lulltra cover After adjusting fill, you can keep the cover fresh without special care steps.
  • Original Adjustable Body Pillow: GREENGUARD Gold and CertiPUR-US certified These certifications apply to the materials, which may matter if you are sensitive to indoor air quality.

Coop adjustable body pillow tips for better support

  • Adjust in small increments: Remove or add fill a handful at a time. The memory foam blend needs a few minutes to settle, so test after each change.
  • Use the dual-case system to your advantage: Keep the inner liner zipped while you adjust so fill stays contained. The outer Lulltra cover can be folded back.
  • Recheck after a few nights: Fill can shift with use. If the pillow feels different after a week, open the case and redistribute.
  • Keep removed fill for later: Store extra fill in a breathable bag. You may want it back if your sleep position or support needs change.

When to stop adjusting

Stop when you can lie in your sleep position for ten minutes without feeling pressure points or needing to shift. The pillow should feel supportive but not rigid. If you are constantly punching or fluffing it, the fill is likely uneven or too full.

The supplied information does not include specific fill weights or a recommended number of handfuls to remove, so use your own comfort as the guide. If you have a medical condition that affects sleep positioning, check with a clinician before relying on any pillow for support.

Related Articles

Customer Service
Home
Products
Cart
Profile